CHARIO CONSTELLATION CYGNUS

CHARIO CONSTELLATION CYGNUS
CHARIO CONSTELLATION CYGNUS
2.649,00 €

CONSTELLATION CYGNUS

This floor -standing speaker features a 3-way configuration. The T38 tweeter and a 130mm driver placed on the front of the speaker, while another 130mm driver is placed at the bottom as a subwoofer. This configuration allows the Cygnus an extension up to 50 Hz and a higher dynamic capacity. This is the result of the subwoofer placement in the lower part, reducing the workload of the front driver(s). The result is a significant increase in articulation and detail , and consequently a reduction in listening fatigue.

The emission angle of the tweeter is 60°, while the subwoofer driver is omnidirectional (360°). The angle of emission of the woofer placed on the front at 170 Hz , which is the point of intersection with the subwoofer, preserves the omni directionality, decreasing in proportion to the intersection with the tweeter.

CONFIGURATION

3 way Free Standing

DRIVERS

1 Tweeter 38 mm Soft Dome
1 Woofer 130 mm paper compound
1 SubWoofer 130 mm paper compound

 

SENSITIVITY

87 dB SPL normalized to 1 m/2.83 Vrms/
de-correlated L/R pink noise in
ITU-R BS 1116-1

 

LOW FREQUENCY CUT OFF

50 Hz @ -3 dB referred to C4 WETS

 

CROSSOVER FREQUENCY

170/1500 Hz

 

RATED IMPEDANCE

Modulus 4 Ω (min 5.8) Argument ±36°

 

LOW FREQUENCY LOAD

Vented Subwoofer NRS  2π sr

 

 

CABINET

High Density Fiberboard and Massive Wood

 

LISTENING LAYOUT

A carpeted floor in front of the
speakers is recommended

 

CABINET FINISHING

Walnut

 

SIZE

955 x 200 x 270 mm (H x W x D)

 

WEIGHT

17 Kg

 

SUGGESTED AMPLIFIER

Up to 80 W / 4 Ω Average Power

NOTE

Sizes and Weight referred to one speaker
Specs subject to change without notice
Average power calculated as V^2 rms/R
All quantities in SI Units